Float control: Place both the draft control lever and the position control lever in the float position to make the lower links move freely along with the ground conditions.Going too deep and causing loss of traction and ground speed. Point where the implement is at the desired depth. To limit the degree, the implement can be lowered, set the position control lever at the lowest working depth desired for the implement. However, the implement sometimes lowers too much. Mixed control: In draft control, when draft decreases, the implement automatically lowers to increase draft.Place the position control lever in the lowest position and set the implement pull with the draft control lever. The draft control also regulates the tractive power required for the. As the load on the 3-point hitch changes due to various soil conditions, the draft control system automatically responds to these changes by either raising or lowering the implement slightly to maintain a constant pull. Draft control is just what it says It controls the amount of load that an implement puts on the tractor. The hydraulic power and lift capacity of the M5001 can easily lift a combination of. Draft control: This will control the pull of the 3-point implement.Position control :This will control the working depth of 3-point hitch mounted implement regardless of the amount of pull required.
0 kommentar(er)
